Spektrum DX18 Manual de Instruções descarregar pdf (Página 24)

24 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL

Import Model

This function overwrites

all model memories.

Ensure that the models

currently in your

transmitter are saved

on an SD card separate

from the transmitter

before performing this

function.

To import an individual model  le from the SD Card:

1. Save the model  le to the SD Card.

2. Select the Model List location where you wish to import the

new model  le.

3. In the SD Card menu, scroll to Select Option and press the

scroll button once.

4. Scroll to Import Model and press the scroll button again to save

the selection. The Select File screen appears.

5. Select the model  le you wish to import. The Overwrite screen

appears.

IMPORTANT: When you select Import, the transmitter leaves the

System Setup List.

6. Select the model that you would like to import the model to.

7. Select Import to con rm overwriting the current model  le. The

transmitter activates the new model  le and the Main Screen

appears.

A Pre ight Checklist may appear prior to the Main Screen if the

checklist was active during the model  le export. Select MAIN to

exit the Pre ight Checklist.

See “Preﬂ ight Setup” for more information.

Import All Models

To import all models from the SD Card:

1. Select Import All Models

2. Con rm by selecting IMPORT.

IMPORTANT: After importing a model, you must rebind the

transmitter and receiver. The Main Screen must show DSM2 or

DSMX in the upper left corner.

You can import a model to any location you want. If you prefer

to use Import All, you can use your PC to rename the SPM  le.

The  rst two digits (01 to 50) are the destination model number.

Your SD card can only contain 50 models. Save  les to folders on

the card then remove from the card all unused models. Files are

selected by their position in the directory table.

Export Model

You can use the Export

Model option to export a

single model  le to the

SD Card.

1. Make sure the active

model  le is the one

you wish to Export.

2. Scroll to Select Op-

tion and press the scroll button once.

3. Scroll to Export Model and press the scroll button again to

save the selection. The Export to SD screen appears. The  rst

two characters of the  le name correspond to the Model List

number (01, for example).

4. (Optional) If you wish to rename the model  le before exporting

it to the SD Card:

a. Scroll to “Save to:” and press the scroll wheel. The File

Name screen appears.

b. Assign a new  le name. The  le name can contain up to

25 characters including the .SPM  le extension.

c. When you are done assigning the new  le name, press

the Back button to return to the Export to SD screen.

5. Select Export to save the  le to the SD Card. When the export is

complete, the transmitter returns to the SD Card Menu screen.

Export All Models

To export all models to the SD Card:

1. Select Export All Models in the SD Card Menu options. The

Export All Models screen appears.

IMPORTANT: Export All Models will overwrite any model  les that:

• Are already saved on the SD Card.

• Have the same name. Always save model  les to a different SD

Card if you are not sure.

2. Select Export to overwrite  les on the SD Card or Cancel to

return to the SD Card Menu.

Update AirWare Software

IMPORTANT: The orange LED Spektrum bars  ash and a status

bar appears on the screen when AirWare software updates are

installing. Never power off the transmitter when updates are

installing. Doing so may damage the system  les.

Before installing any AirWare  les, always Export All Models to an

SD Card separate from the SD Card containing the update. The

update may erase all model  les.

For more information on AirWare software updates, visit

spektrumrc.com

Automatically Installing AirWare Software Updates

To install the most recent update:

1. Download the update from spektrumrc.com and

save it to the SD Card.

2. Power off the transmitter and install the SD Card in the

transmitter.

3. Power on the transmitter and the update automatically installs

in the transmitter.

Manually Installing AirWare Software Updates

1. Save the desired AirWare version to the SD Card.

2. Select Update Firmware in the SD Card Menu options. The

Select File screen appears.

3. Select the desired AirWare version from the File List. When up-

dates are installing, the transmitter screen is dark. The orange

LED Spektrum bars  ash and the update status bar appears on

the screen.

NOTICE: Do not power off the transmitter when updates are

installing. Doing so will damage the transmitter.

Transfer SD Card

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 46 47

Comentários a estes Manuais

Sem comentários

Spektrum DX18 Manual de Instruções Página 24

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Spektrum DX18