Spektrum SPM2020 DX2 Manual do Utilizador descarregar pdf (Página 24)

The Servo Reversing feature of the DX2 is a very convenient feature when setting up a new

model. The purpose of the servo reversing function is to change the direction of the servo

rotation in relation to the wheel/trigger movement. The Servo Reversing function is available

for the steering and throttle of the DX2.

Accessing the Servo Reversing Function

To access the Servo Reversing function, follow the steps below:

Press the MODE key until

REV•NORM appears on the

screen

MODE CHANNEL

ENTER

SYSTEM

Press the CHANNEL key to

select the desired channel to be

adjusted

ST = Steering

TH = Throttle

Press the INCREASE or

DECREASE keys to toggle

between REV and NORM

INCREASE DECREASE

CLEAR

DIRECT

+ –

1. Turn the transmitter power switch on.

2. Press the MODE key to access the Function Mode.

3. Press the MODE key until REV.NORM appears in small letters to the right of the screen.

4. Press the CHANNEL key to select the channel to be changed

(ST = Steering, TH = Throttle).

5. Press the INCREASE or DECREASE keys to move the cursor to the desired direction.

6. To exit the Function Mode, either turn off the transmitter power switch or press the

MODE and CHANNEL keys at the same time.

Servo

Reversing

(Function Mode)

REV • NORM

–

Indicates curent channel:

ST = Steering

TH = Throttle

Cursor indicates current servo direction

–

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Sem comentários

Spektrum SPM2020 DX2 Manual do Utilizador Página 24