Spektrum DX8 Manual de Instruções descarregar pdf (Página 28)





Highlight E-ring then press the roller to access the Electronic Cyclic Ring

function.



The Governor function adjusts engine rpm when using a Governor or throttle

limiter. You can program up to four governor values to be selected from a variety

of switches including the ﬂight mode switch. You can adjust Governor values in

.5% increments to allow for precise rpm adjustments. Also, you can program the

channel the governor controls.



With the transmitter on and the main or telemetry screen displayed, press the

roller. The Function list displays.

Rotate the roller to highlight Governor then press to access that screen.



The Governor function defaults to Inhibit. To activate the Governor function, rotate

the roller to highlight Inhibit; then, press to access the switch function. Select

the desired switch to control the governor then press the roller to access the

Governor screen.



In this screen you can assign the receiver channel the Governor is plugged into.

The governor and the gyro must use two different channels. If the gyro function

uses a channel, it will not appear in the governor list.

Rotate the roller to highlight Ch: (channel) then press to access that function.

Select the channel the governor will be plugged into. Normally Aux 2 is used.



Rotate the roller to select the desired governor value. Press to access. Rotate to

adjust the value.

Note: the displayed value is the corrected governor value. 0% represents

1.500ms or off with most governors.

Repeat this for all desired governor values.



The DX8 features a 5-point Pitch curve. You can set up to four separate Pitch

curves. A graph displays at the left side of the screen to aid in adjusting pitch

curves. An Expo function is available that smooths out the curve.



With the transmitter on and the main or telemetry screen displayed, press the

roller. The Function list displays.

Rotate the roller to highlight Pitch Curve then press.



Highlight the desired ﬂight mode at the top of the screen. Press the roller to

select. The selected ﬂight mode will darken to conﬁrm the selection.

N= Normal

1= Stunt 1

2= Stunt 2

H= hold



Move the ﬂight mode switch in the position you wish to adjust. Rotate the roller

to highlight one of the ﬁve available pitch curve values (Low, 25%, 50%,75%,

High). Press to access that value.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

Comentários a estes Manuais

Sem comentários

Spektrum DX8 Manual de Instruções Página 28

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Spektrum DX8