Spektrum DX9 Manual de Instruções descarregar pdf (Página 15)

15SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL

Channel Assignment

TheChannelAssignmentfunctionallowsyoutoreassignalmost

any receiver channel to a different transmitter channel. For

example,thereceivergearchannelcouldbere-assignedtothe

transmitter throttle channel.

1. Scroll to the receiver channel you wish to change.

2. Press the scroll wheel once and scroll left or right to change

the receiver input selection.

3. Press the scroll wheel a second time to save the selection.

IMPORTANT:Youcannotassignamixtoachannelthathasbeen

moved.Createthemixrst,thenmovethechannel.

Channel Input Conﬁguration

TheChannelInputCongurationscreenenablesyoutoassigna

transmitter channel to a different control stick

or switch.

1. Select NEXT on the RX Port Assignments screen to access the

ChannelInputCongurationscreen.

2. Scroll to the transmitter channel you wish to re-assign and

pressthescrollwheel.Theboxaroundthecurrentinput

selection ﬂashes.

3. Scroll left or right to select the desired control stick or switch.

4. Press the scroll wheel to save the selection.

Trim Setup

Use the Trim Setup screen to change the size of the trim step and

the trim type.

Trim Step

Adjusting the trim step value determines how many “clicks” of trim

youinputeachtimeyoupressthetrimbutton.Changingthetrim

step value to 0 disables the trim for the channel.

To change the trim step value:

1. Scroll to the trim step channel you wish to change.

2. Select the trim step value and scroll left or right to change the

value.

3. Press the scroll wheel to save the selection.

Trim Type

The two Trim Type options are Common and F Mode.

Common trim type maintains the same trim values for all ﬂight

modes.

F Mode trim type enables you to save trim values for individual

ightmodesifyound,forexample,theaircraftrequiresaileron

trim in Flight Mode 1 but not in Flight Mode 2.

Trim Assignment

In a few instances, you can reassign a trim to a different location.

Aircraft Model Type

Throttle

• Throttle Digital trim button (default)

• Left Analog lever

• Right Analog lever

Throttle Trim Type

• Common

• Flight Mode

Helicopter Model Type

Throttle and Pitch Hover Trim —Used to trim the throttle and pitch

setting for precision hovering. This does not affect normal throttle

trim operation.

• Right Knob

• Left Analog Lever

• Right Analog Lever

• L Trim

• R Trim

Active Gyro and Governor Trim—Used to trim the gyro and

governor settings in ﬂight.

• L Trim

• R Trim.

Trim Location

NormalandCrosstrimtypesareavailable.Normaltrimsalign

withthecontrolstick;forexample,thethrottletrimisnexttothe

throttle stick.

Crosstrimsreversethepositionofthetrims;forexample,the

throttletrimisnexttotheelevatorstickandviceversa.

TochangetheTrimPositionfromNormaltoCrossed,selectNormal

at the bottom of the Trim Setup screen and press the scroll wheel.

IMPORTANT:Crossedtrimswillcrossbothsetsoftrimsforboth

gimbals.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comentários a estes Manuais

Sem comentários

Spektrum DX9 Manual de Instruções Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Controlos remotos Spektrum DX9