Spektrum DX9 Manual de Instruções Página 26

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 25
26 SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL
EN
Speed
The Speed menu enables you to show the response time on any
individual channel (such as retracts).
The Speed is adjustable in the
following ranges:
• Nor (No Delay) — 0.9s in 0.1 second increments
• 1s – 2s in 0.2-second increments
• 2s – 8s in 1-second increments
To adjust the Speed:
1. Scroll to the channel you wish to adjust and press the scroll
wheel.
2. Scroll left or right to adjust the speed and press the scroll
wheel to save the selection.
Absolute (Abs.) Travel
The Abs. Travel function limits the amount of travel on a channel.
Adjust the Abs. Travel value to prevent a servo from binding when
amixisapplied.
Balance
Balance is available on all channels to fine-tune the servo position
atupto7points.Thisisaprecisioncurvemixthatisnormally
used to prevent binding when multiple servos are used on a single
control surface.
You can also use the Balance menu option to match throttle
response on twin engine aircraft or level the swashplate on a
helicopter.
D/R & Exponential
DualRatesandExponentialareavailableontheaileron,elevator
and rudder channels.
To adjust the Dual Rate and Exponential:
1. Scroll to the channel and press the scroll wheel once. Scroll
left or right to select the channel you wish to change and
press the scroll wheel again to save the selection.
2. Scroll to dual rate and press the scroll wheel. Scroll left or
right to change the value and press the scroll wheel again to
save the selection.
Exponentialaffectscontrolresponsesensitivityaroundcenterbut
hasnoaffectonoveralltravel.Positiveexponentialdecreasesthe
sensitivity around the center of gimbal movement.
Differential (Air and Sail Types only)
The Differential screen enables you to increase or decrease the
amount of differential between aileron control surface throws.
Positive Differential values decrease the amount of “down” travel
without affecting the “up” travel on the opposite control surface.
Negative Differential values decrease the amount of “up” travel
without affecting the amount of “down” travel on the opposite
control surface.
The Differential menu option only appears when a multi-servo
aileron wing type is active in Aircraft Type.
To adjust the Differential:
1. Scroll to Switch and press the scroll wheel. Scroll right to
selectOn(Differentialisalwayson)orassignthedifferentialto
a switch position.
2. Press the scroll wheel a second time to save the selection.
3. Scroll to the percentage selection and press the scroll wheel
once to change the value.
4. Press the scroll wheel again to save the selection.
Vista de página 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Comentários a estes Manuais

Sem comentários